本页部分内容以其撰写时的语言显示，因为翻译尚未完成。
要点
- 通过建模放大器链处理现场乐器信号。
- 音频输入和输出通过 JACK 连接处理。
- 效果单元可以在机架中添加、重新排序和旁路。
- 链和参数设置被保存并作为预设调用。
- 在 Linux 上运行并需要正常工作的 JACK 音频设置。
关于此应用
guitarix is a virtual amplification program for electric guitar and other instrument signals on Linux. It takes a live input signal through JACK, passes it through a modelled amplification chain, and returns the processed result to JACK outputs, so it sits in a routing graph alongside recorders, other processors and monitoring paths rather than working as a standalone recorder.
Processing is arranged as a chain: an amplifier stage with its own gain and tone controls, cabinet and tone shaping, and a rack of additional effect units that can be added, reordered and switched on or off. Parameter settings can be stored and recalled as presets, which makes it possible to move between sounds during a session without rebuilding the chain by hand.
Because the program depends on JACK for audio transport, it needs a working JACK setup and a low-latency audio configuration to be usable for live playing. It is distributed for Linux under GPL-2.0-or-later by the Guitarix developers.
获取途径
Linux
- 在 Flathub 上打开在新标签页中打开软件包仓库Flathub
来自发布者
在终端中安装
flatpak install flathub org.guitarix.Guitarix
我们不托管该文件，不扫描该文件，也不检查其内容。请阅读来源的说明，然后自行判断。